Sencore MRD 3187B User Manual download pdf (Page 11)

MRD 3187B User Manual

Page 10

1.1 Installation

Cooling

The MRD 3187B is cooled via forced induction through the front of the unit and exhausted

through the vents on either side. The MRD 3187B is equipped with a temperature controlled

status indicator. If the temperature in the inside of the unit exceeds 70° C the red “Error”

LED will illuminate and a description of the error will appear in the “Error List.”

Rack Information

The MRD 3187B is intended to be mounted in a standard 19” rack. It occupies 1U of rack

space and the connections are all on the rear of the unit.

Rack Installation

To install the MRD 3187B into a rack use the

following steps:

1. Determine the desired position in the rack for the

MRD 3187B making sure that the air intake on

the front of the unit and the exhausts on the sides

of the unit will not be obstructed.

2. Insert the rack mount clips into place over the

mounting holes in the rack.

3. Slide the MRD 3187B into position in the rack.

4. Secure the MRD 3187B to the rack by installing

the four supplied screws through the front

mounting holes and tightening.

Power Connection

Using the proper power connections is vital to the safe operation of the MRD 3187B. Only

use the supplied 3-prong power connector or one with equal specifications. NEVER tamper

with or remove the 3

– prong grounding pin. This could cause damage to the MRD 3187B,

personnel, or property.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 202 203

No comments

Sencore MRD 3187B User Manual Page 11