Sencore MRD 3187B User Manual download pdf (Page 12)

MRD 3187B User Manual

Page 11

AC Power Connection

The MRD 3187B is intended for use on either 120V or 240V systems. The power supply

will automatically detect the system it is connected to. To hook up the power use the

following steps:

1. Locate the AC power cord that was included with the MRD 3187B.

2. Plug the female end of the power cord (end with no prongs) into the back of the unit.

3. Locate a protected outlet (usually inside of the rack) to plug the male end of the power

cable into.

DC Power Connection (if equipped)

Using the proper power connections is vital to the safe operation of the MRD 3187B. The

MRD 3187B is intended for use in 40-65Vdc systems. The power supply will automatically

detect the system it is connected to. When installing the MRD 3187B, the power supply

MUST be used in conjunction with an over-current protective device rated at 50V, 5A,

type: Slow-blo, as part of battery-supply circuit. Failure to include an over-current

protective device could cause damage to the MRD 3187B, personnel, or property.

1.2 Quick Start Guide

Quick Start

To get the MRD 3187B up and running there is a few things that need to be done.

1. Select the desired input as active.

2. Setup the decoder with the proper PIDs.

3. Setup the desired output(s).

The easiest way to set these options up is to refer to Section 4. At the beginning of Section 4

is a table that shows the specific cards included in that section. Find the desired card in the

table, then navigate to the corresponding page number and follow the step-by-step

instructions.

1.3 Maintenance

The MRD 3187B is virtually a maintenance-free piece of equipment. There are no user

serviceable parts on the inside of the unit however it is recommended that the user cleans the

intake filter on the front right side of the unit on a regular basis to ensure the unit has an

unobstructed cool air intake. This filter is removed easily, for cleaning, by opening the door

on the front right side of the unit and removing the filter.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 202 203

No comments

Sencore MRD 3187B User Manual Page 12